To Next PageTo Next Page
Need help?Do you have a question about the RIDGID R2401 and is the answer not in the manual?
General| LED Light | Yes |
|---|---|
| Soft Start | Yes |
| Variable Speed | Yes |
| Maximum Speed | 30, 000 RPM |
| Voltage | 120V |
| Base Type | Fixed |
| Depth Adjustment | Yes |
| Collet Diameter | 1/4 inch |
| Amperage | 2.4 Amp |
| Cord Length | 6 ft |
| Amps | 2.4 Amp |
| Certifications and Listings | ETL |
Ensures safe operating conditions, including lighting and keeping unauthorized persons away.
Covers proper plug use, grounding, and protection against water and damaged cords.
Emphasizes user alertness, protective gear, and avoiding distractions or improper attire.
Ensures safety during servicing and using only identical replacement parts.
Covers handling, workpiece securing, protective gear, and cord inspection.
Alerts to potential chemical exposure from dust and related health risks.
Explains the hierarchy of hazard alert words: DANGER, WARNING, CAUTION, NOTICE.
Defines common symbols used on the product for safe operation and understanding.
Explains the concept of double insulation and its role in electrical safety.
Specifies voltage, frequency, and AC/DC compatibility for the tool.
Provides recommendations for selecting, using, and inspecting extension cords.
Lists key product details such as collet size, no-load speed, and input power.
Describes the depth scale, edge guide, LED worklight, motor, bases, and controls.
Encourages familiarization with features and safety rules prior to operation.
Instructions for unpacking the router and checking for included items and damage.
Details on removing the base, attaching the square subbase, and securing the motor housing.
Step-by-step guide for safely installing and removing router bits.
Covers general warnings, eye protection, accessory use, and overload reset procedures.
Lists common uses and initial steps like turning the router on and off.
Explains how to use the variable speed dial for optimal cutting performance.
Guides on directing feed and preventing kickback for safe operation.
Discusses factors influencing feed rate for clean cuts and preventing motor strain.
Explains the negative effects of improper feed rates on cut quality and tool performance.
Advises on safe depth limits, multi-pass cutting, and using the adjustment mechanism.
Instructions for attaching and using the edge guide for precise trimming.
Covers safe cleaning practices and avoiding chemical damage to plastic parts.
Details lubrication needs, power cord replacement, and general tool care.
Step-by-step instructions for replacing worn motor brushes.
