RIDGID R09897 User Manual

To register your RIDGID
product, please visit:
register.ridgidpower.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
register.ridgidpower.com
Para registrar su producto
de RIDGID, por favor visita:
register.ridgidpower.com
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Stapler Safety Warnings ..................3-4
Symbols ...........................................4-5
Features ..............................................5
 Assembly ............................................ 5
 Operation .........................................6-7
 Maintenance ....................................... 7
 Illustrations ......................................8-9
 Parts Ordering and
Service ................................Back page
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
 Avertissements de sécurité
relatifs agrafeuse .............................3-4
Symboles .........................................4-5
 Caractéristiques .................................5
 Assemblage ........................................5
 Utilisation ........................................6-7
 Entretien .............................................7
 Illustrations ......................................8-9
 Commande de pièces
et dépannage ................... Page arrière
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad para
herramientas eléctrica ................... 2-3
 Advertencias de seguridad
de grapadora ................................. 3-4
Símbolos ........................................ 4-5
Características ...................................5
 Armado ..............................................5
 Funcionamiento ............................. 6-7
 Mantenimiento ...................................7
 Illustraciones .................................. 8-9
 Pedidos de piezas
y servicio .......................Pág. posterior
WARNING:
To reduce the risk of injury,
the user must read and un-
derstand the operator’s man-
ual before using this product.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire
et veiller à bien comprendre
le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de
lesiones, el usuario debe leer
y comprender el manual del
operador antes de usar este
producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT 3/8 in. CROWN STAPLER
18 V DE 9,5 mm (3/8 po)
AGRAFEUSE POUR AGRAFES
GRAPADORA DE CORONAS
DE 18 V y 9,5 mm (3/8 pulg.)
R09897

RIDGID R09897 Specifications

General

Model	R09897
Type	Hammer Drill
Cordless	Yes
Voltage	18V
Brushless Motor	Yes
Speed Settings	2
Battery Type	Lithium-Ion (Li-Ion)
Chuck Size	1/2 inch
Max Torque	750 in./lbs.

Summary

General Power Tool Safety Warnings

Work Area Safety

Safety guidelines for maintaining a clean and well-lit work environment.

Electrical Safety

Precautions to prevent electric shock when using the power tool.

Personal Safety

Measures to ensure user alertness and proper attire for safe operation.

Power Tool Use and Care

Instructions for correct tool application, handling, and basic care.

Battery Tool Use and Care

Recharge Battery Pack

Instructions for charging battery packs using specified chargers.

Use Designated Battery Packs

Guidelines for using only manufacturer-approved battery packs.

Stapler Safety Warnings

Fastener Handling and Discharge

Precautions against accidental fastener discharge due to improper handling.

Operational Safety Rules

Guidelines for safe tool operation, workpiece contact, and jam clearing.

Prohibited Uses and Electrical Hazards

Warnings against using the tool for electrical cables and ensuring safe grip.

Symbols

Safety Signal Words

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signals.

Features

Product Specifications

Technical specifications including magazine capacity and staple size.

Assembly

Assembly Integrity Warning

Warning about using the product only when fully assembled and without damaged parts.

Product Modification Warning

Warning against altering the product or using unrecommended accessories.

Operation

Tool Setup and Preparation

Covers battery installation, loading staples, and setting drive force.

Operation Procedures and Accessories

Guide to stapling, using LED light, accessories, and clearing jams.

Maintenance

General Maintenance

Guidelines for cleaning and maintaining the tool using appropriate materials.