EasyManua.ls Logo

RIDGID R84730 User Manual

RIDGID R84730
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT DRYWALL CUT-OUT TOOL
OUTIL À DÉCOUPER POUR CLOISON SÈCHE DE 18 V
HERRAMIENTA DE CORTE DE YESO DE 18 V
R84730
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
WARNING:
To reduce the risk of injury, the
user must read and understand
the operator’s manual before
using this product.
ADVERTENCIA:
Para reducir el riesgo de lesiones,
el usuario debe leer y comprender
el manual del operador antes de
usar este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’employer ce produit.
TABLE OF CONTENTS
****************
General Power Tool Safety
Warnings .........................................2-3
Drywall Cut-Out Tool
Safety Warnings ................................. 4
Symbols .............................................5
 Features .............................................5
 Assembly ...........................................6
Operation ........................................6-7
Maintenance ......................................8
Illustrations ....................................9-10
Parts Ordering and
Service ................................Back page
TABLE DES MATIÈRES
****************
Règles de sécurité générales
relatives aux outils électriques ........2-3
Avertissements relatifs à l’outil à
découper pour cloison sèche ............4
Symboles ...........................................5
Caractéristiques ................................. 5
 Assemblage .......................................6
Utilisation .......................................6-7
Entretien ............................................. 8
Illustrations ....................................9-10
Commande de pièces
et dépannage ....................Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad generales
para la herramienta eléctrica ......... 2-3
Advertencias de seguridad de la
herramienta de corte de yeso ............4
Símbolos ............................................5
Características ...................................5
 Armado ..............................................6
Funcionamiento ............................. 6-7
Mantenimiento ...................................8
Illustraciones ................................ 9-10
 Pedidos de piezas
y servicio .......................Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
Includes: Drywall Cut-Out Tool,
Collet (1/4 in.), Operator’s Manual
Inclut : Outil à découper pour cloison
sèche, collet [6,35 mm (1/4 pulg.)], manuel
d’utilisation
Incluye: Herramienta de corte de yeso,
portaherramientas [6,35 mm (1/4 pulg.)],
manual del operador
Question and Answer IconNeed help?

Do you have a question about the RIDGID R84730 and is the answer not in the manual?

RIDGID R84730 Specifications

General IconGeneral
BrandRIDGID
ModelR84730
CategoryCutter
LanguageEnglish

Summary

General Power Tool Safety Warnings

Electrical Safety

Match plugs, avoid grounded surfaces, keep cords dry, use outdoor extension cords, and use GFCI.

Personal Safety

Stay alert, use PPE, prevent unintentional start, remove keys, do not overreach, dress properly, and use dust extraction.

Drywall Cut-Out Tool Safety Warnings

Assembly and Operation

Starting and Stopping

Ensure spindle lock released, install battery, hold tool away, then push switch to ON/OFF.

Detailed Operation and Adjustments

Installing and Removing Bits

Remove battery, release depth lever, loosen/tighten collet nut with wrench/guide, handle bits carefully.

Operating the Tool

Install battery, hold firmly, slide switch ON, tilt 45°, plunge bit, raise to 90°, begin cutting.

Adjusting Depth of Cut

Remove battery, release depth lock lever, adjust guide position, and engage lever to secure.

Maintenance Procedures

Related product manuals