To Next Page
R
Rachael PowellJul 26, 2025
How to fix RIDGID Pressure Washer when engine fails to start?
- MMichael JonesJul 26, 2025
If the RIDGID Pressure Washer engine won't start, first ensure the engine switch is in the start position and the fuel valve lever is set to ON. Check the fuel tank level and refill if necessary. Inspect the spark plug for shorts, fouling, or breakage, and replace it if needed. Also, verify the ignition lead wire is properly connected to the spark plug and replace if broken or shorted. Ensure the lubricant level is adequate by adding lubricant to the engine.
General
