To Next PageTo Next PageHow to fix a RIDGID RD80704 Pressure Washer engine that is hard to start?
If the engine of your RIDGID Pressure Washer is hard to start, drain the entire system and refill it with fresh fuel. Also, pull the trigger to release water pressure.
Why doesn't my RIDGID Pressure Washer reach high pressure?
If your RIDGID Pressure Washer doesn't reach high pressure, ensure the garden hose isn't too small by replacing it with a 3/4 inch hose. Check the garden hose for any restrictions such as kinks, leaks, or blockages, and clean the inlet screen. Open the water source fully. Ensure the correct high pressure nozzle is attached and increase the engine speed.
What to do if my RIDGID RD80704 Pressure Washer pump doesn’t produce pressure?
If your RIDGID Pressure Washer pump doesn’t produce pressure, replace the low pressure nozzle with a high pressure nozzle. Ensure there is an adequate water supply. Squeeze the trigger to remove air from the line. Clean the inlet screen and nozzle.
What to do if detergent fails to mix with spray in my RIDGID RD80704 Pressure Washer?
If detergent fails to mix with the spray of your RIDGID Pressure Washer, ensure the detergent injection hose is fully submerged in the detergent container. Use the Dual Power Soap Nozzle to apply detergent. Remove or replace the injection hose if it is clogged or kinked. Clean or replace the chemical injector if it is clogged.
General| Brand | RIDGID |
|---|---|
| Model | RD80704 |
| Category | Pressure Washer |
| Language | English |
Explains risk levels associated with DANGER, WARNING, and CAUTION signals.
Explains common symbols used on the product for safe operation.
Lists key technical details like engine size, tank capacity, pressure, and flow rate.
Explains the trigger mechanism and its lock-out function for safety.
Informs about the absence of a spark arrestor and availability.
Instructions for carefully removing the product and checking contents.
Crucial warnings about using damaged parts, modifications, and preventing accidental starting.
Step-by-step guide for attaching the rear panel using screws.
Instructions for installing wheels, axles, hitch pins, washers, support feet, bolts, and nuts.
Step-by-step guide for checking and adding engine oil, including capacity.
Instructions for safely adding unleaded gasoline to the fuel tank.
Critical warnings about familiarity, eye protection, accessory use, and water stream direction.
Detailed procedure for starting and stopping the engine, including choke usage.
How to operate the trigger, including engaging and disengaging the lock out.
Guide on selecting the correct nozzle for different cleaning applications.
Step-by-step guide for attaching and removing nozzles using the quick-connect collar.
Instructions for using detergents, including types and application methods.
How to rinse surfaces, including nozzle selection and stroke technique.
Instructions on how to safely tilt and roll the unit for repositioning.
Guidance on releasing pressure and preparing the unit for storage.
Critical warnings regarding using correct parts, eye protection, and engine shutdown before service.
Step-by-step instructions for cleaning and oiling the air filter for optimal performance.
Detailed procedure for draining old oil and refilling with new oil.
Instructions for checking and changing the pump oil, including oil type and capacity.
How to clean clogged or dirty nozzles to restore pump pressure.
Instructions for preparing and storing the unit for extended periods.
Steps to take to prepare the machine for operation after a period of storage.
Steps for preparing the spark plug and cylinder for storage.
Instructions for cleaning the fuel tank inlet screen annually.
Details the warranty coverage for emissions components and its applicability.
Instructions on how to find and contact authorized service dealers for warranty claims.
Outlines the owner's responsibilities for maintenance and proper use.
Steps to follow when initiating a warranty claim for service.
Explains warranty rights and obligations specific to California emissions standards.
Covers the design, build, and defect-free nature of the SORE under California law.
Recommendations for modifying the engine for continuous operation above 5000 feet.
Explains the Air Index level and durability period for emission compliance.
Details the warranty terms and conditions for the engine itself.
Lists warranty durations for different Subaru Robin engine series.
Details items not covered by the engine warranty, such as misuse or normal wear.
Outlines the specific 3-year limited warranty for the pressure washer.
Defines what the 3-year warranty covers for the pressure washer.
Lists exclusions from the pressure washer warranty, like wear, misuse, or lack of maintenance.
Instructions on how to find and contact authorized service centers for repairs.
