RIDGID RD80964 - Assembly Instructions; Unpacking and Initial Checks; Attaching Main Components

9
ASSEMBLY
WARNING:
If any parts are damaged or missing do not oper-
ate this tool until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool. Any
such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug when
assembling parts.
ATTACHING THE REAR PANEL
See Figure 2.
 Locate the rear panel and screws.
 Using the Torx wrench provided, secure panel to handle
using the screws.
HANDLE
REAR
PANEL
TORX
SCREW
Fig. 2
Fig. 3
ON
O
HITCH PIN
AXLE
WASHER
WHEEL