PERFORMER Digital Partyline, User Manual, Version 2.30
3.2.5 LISTEN (Latching)
An active LISTEN key (channel key block) enables listening to the related digital partyline
channel. If the LISTEN key is deactivated, the LISTEN function of the related partyline is
muted.
Note: The LISTEN function can also be switched ON / OFF by the LISTEN encoder.
Function LISTEN Key
LISTEN ON (default mode) Green 100%
LISTEN OFF Green 10%
3.2.6 LISTEN Knob (2 Functions)
Volume Control
The listen rotary encoder (channel key block) adjusts the LISTEN volume (0-100%) of the
related DPL channel. Turn the encoder clockwise to increase and counterclockwise to
decrease the volume. The LISTEN volume is MUTED when the encoder is turned
counterclockwise as far as it will go.
LISTEN On / Off
Pushing the rotary encoder (channel key block) switches the LISTEN ON / OFF (0 / 100%).
This function works parallel to the LISTEN key.
3.2.7 TALK A/B (Auto / Momentary)
An active TALK key (channel key block) enables talking to the related digital partyline
channel. The TALK key can be set to auto (short press=latching, long press=momentary) or
momentary using DIP switch 1 for channel A and DIP switch 2 for channel B on the back of
the unit.
Note: If the unit is in mute mode (M/MUTE key active, function key block), talking on a
channel is not possible. Formerly active or pre-selected TALK keys are indicted by a slow
flashing TALK key.
Power Failure Indication
A blue TALK key on channel A indicates a short-circuit / overload on the related partyline.
Page 11
To Next Page
Loading...
Need help?
General
