EasyManua.ls Logo

RIEJU Tango 125 E4 - To Brake (Slowing Down); Stopping; Gear Box Pedal

RIEJU Tango 125 E4
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
…for everyday adventure
Tango 125 E4
TO BRAKE (SLOWING DOWN)
C lose the throttle; activate the front and rear brakes simultaneously, increasing the pressure progressively.
WARNING:
Sudden braking can cause skidding.
STOPPING
Close the throttle and activate both brakes simultaneously and when the vehicle has reduced speed, Pull in
the clutch lever all the way. To stop the motor, switch off the ignition and remove key. Once the motor has
stopped always close the petrol tap.
GEAR BOX PEDAL
The Gear lever is located near the left hand engine case of the motor and is activated with the foot taking it
all the way down or up, letting it come back to its’
original position before changing gear again. To put the
motorbike into first gear, the pedal has to be pushed downwards,
to put in other gears lift the lever up as far
as it will go with the toe. Gear changing should be done carefully to ensure the gear you want is selected
before releasing the clutch.
30

Table of Contents

Related product manuals