To Next Page
E
Emily SteinAug 8, 2025
What to do if my Riello 7200.200 V PLUS Water Heater storage cylinder functions incorrectly?
- TthompsonangelaAug 8, 2025
If the storage cylinder of your Riello Water Heater is functioning incorrectly, there might be several reasons: * A flow rate that is too high. In this case, fit either a pressure limiter or a flow reducer. * Blockages or deposits in the domestic hot water circuit. You should check and clean the circuit as necessary. * A malfunctioning pump. You should check the pump. * The water temperature from the boiler is too low. You should check the temperature setting. * Air in the primary circuit. You should bleed the circuit.
General
