Riello 7200.200 V PLUS - Overall Dimensions and Water Fittings

9
GENERAL
GENERAL
9 OVERALL DIMENSIONS AND WATER FITTINGS
7200 V Plus 200 ÷ 550
ES
RCRE
US
EAF
(SB)
UAC
A
B
C
D
E
F
G
H
(*)
I
(*) Cable routing
R 7200 V Plus storage cylinders can also be connected to previously installed water heating systems provided they are of adequate
output power, but care must be taken to ensure correct water ow directions.
Water ttings have the following specications:
DESCRIPTION
7200 V Plus
200 300 430 550
UAC Domestic hot water outlet 1"F Ø
ES Heat exchanger inlet 1"F 1"1/4F Ø
RC DHW recirculation 3/4"F Ø
US Heat exchanger outlet 1"F 1"1/4F Ø
EAF (SB) Domestic cold water inlet (storage cylinder drain) 1"F Ø
RE Sleeve for electric heating element (not supplied) 1"1/2F Ø
A 1000 1490 1330 1645 mm
B 675 955 910 910 mm
C 365 365 455 455 mm
D 170 170 205 205 mm
E 315 315 405 405 mm
F 565 805 780 780 mm
G 675 955 895 895 mm
H 965 1165 1240 1240 mm
I 1165 1670 1440 1785 mm
We recommend that you install isolating valves in the outlet and return lines.
9
Check the efciency of the seals when lling/relling the storage cylinder.