USE
19
1 Mesh filters
1
— open the front panel
— take out the mesh filter by grabbing the relevant fins
— remove exhausted purifying filters if present
— remove dust with an vacuum cleaner
9
If there is a considerable amount of dust, wash it with luke-
warm water (max 40°C) and a neutral detergent, carefully
rinse it off and let it dry in the shadow.
9
Exposing the filters to the sun or washing them with water
at a temperature that is higher than 40°C can cause the fil-
ters to shrink.
0
It is forbidden to use the device without mesh filter.
Purifying filter replacement
Cleaning purification filters, if any, ensures trouble-free opera-
tion of the climate control system and air quality.
To replace the filters:
1 Mesh filters
1
— open the front panel
— take out the mesh filter by grabbing the relevant fins
1 Mesh filters
2 Air purifying filter
2
1
— remove exhausted purifying filters
— insert new purifying filters into the prearranged slots
— to reposition them, proceed in reverse order
9
Keep the purifying filters sealed until their actual use.
9
Installing the purifying filters reduces the air flow and re-
sults in lower performance. It is advised to use the device at
the highest speeds.
To Next Page
Loading...
