Riello BG6.1D - Declaration; Declaration of Conformity (ISO;IEC 17050-1); Declaration of Conformity (Belgium); Manufacturers Declaration

3
20137240
GB
Declaration
1 Declaration
Declaration of conformity in accordance with ISO / IEC 17050-1
Manufacturer: RIELLO S.p.A.
Address: Via Pilade Riello, 7
37045 Legnago (VR)
Product: Light oil burner
Model: BG6.1D - BG6.1D TL
BG7.1D
These products are in compliance with the following Technical Standards:
EN 267
EN 12100
and according to the European Directives:
MD 2006/42/EC Machine Directive
LVD 2014/35/UE Low Voltage Directive
EMC 2014/30/UE Electromagnetic Compatibility
Quality is ensured by means of an ISO 9001:2015 certified quality and management system.
Declaration of Conformity A.R. 8/1/2004 & 17/7/2009 – Belgium
Manufacturer: RIELLO S.p.A.
37045 Legnago (VR) Italy
Tel. ++39.0442630111
www.riello.com
Distributed by: RIELLO NV
Ninovesteenweg 198
9320 Erembodegem
Tel. (053) 769 030
Fax. (053) 789 440
e-mail. info@riello.be
URL. www.riello.be
This document certifies that the series of devices specified below is in compliance with the model described in the EC Declaration of
Conformity and has been manufactured and distributed in compliance with the requirements defined in the Legislative Decree of
January 8th 2004 and July 17th 2009.
Product type: Light oil burner
Model: BG6.1D - BG6.1D TL
BG7.1D
Regulation applied: EN 267 and A.R. of January 8th 2004 - July -17th 2009
Values measured: BG6.1D - BG6.1D TL
BG7.1D
Max. CO: 5 mg/kWh
Max. NOx: 81 mg/kWh
Max. CO: 1 mg/kWh
Max. NOx: 78 mg/kWh
Manufacturer's Declaration
RIELLO S.p.A. declares that the following products comply with the NOx emission limits specified by German standard “1. BIm-
SchV revision 26.01.2010”.
Product Type Model Output
Light oil burners 985T BG6.1D - BG6.1D TL 53.8 - 104 kW
986T BG7.1D 77.7 - 149.5 kW
Legnago, 01.12.2015 General Manager
RIELLO S.p.A. - Burners Department
Research and Development Director
RIELLO S.p.A. - Burners Department
Eng. U. Ferretti Eng. F. Comencini