Riello MultiCOM 392 - Output Configuration Examples

- S3T / S3M / S3U -
29
EXAMPLE 1 - if you set an output in this way:
Output mode
Logic
Delay (s)
Battery working
Relay ON
0
the relative contact will be:
UPS working by mains
UPS in battery working mode
EXAMPLE 2 - if you set an output in this way:
Output mode
Logic
Delay (s)
Battery working
Relay OFF
10
the relative contact will be:
UPS working by mains
UPS in battery working mode for at least 10 seconds