9
20035784
Technical description of the burner
4.3 Technical data
Tab. A
(1)
Reference conditions: ambient temperature 20°C - Barometric pressure 1013 mbar - Altitude 0 m a.s.l.
4.4 Electrical data
MOTOR IE1
MOTOR IE2
Tab. B
(*) Only with star-delta starter for P 450 T/G burner model.
4.5 Packaging - Weight
• The burners stands on a wooden base which can be lifted by
fork-lifts. Outer dimensions of packaging are indicated in Tab. C.
• The weight of the burner complete with packaging is indicat-
ed in Tab. C.
Tab. C
MODEL P 140 T/G P 200 T/G P 300 T/G P 450 T/G
Type 476 M1 477 M1 478 M1 479 M1
Output
(1)
Delivery
kW
kg/h
380 - 1660
32 - 140
557 - 2370
47 - 200
710 - 3560
60 - 300
890 - 5340
75 - 450
Operation 1 stage - 2 stage - 3 stage
Fuel Gas oil and Blends of gas oil and bio fuel (FAME in accordance with EN 14214)
up to 10%
Gas oil net calorific value
density
viscosity at 20 °C
kWh/kg
Mcal/kg
kg/dm
3
mm
2
/s max
11.86
10.2 (10.200 kcal/kg)
0.82 - 0.85
6 (1.5 °E - 6 cSt)
Kerosene net calorific value
density
viscosity at 20 °C
kWh/kg
Mcal/kg
kg/dm
3
mm
2
/s max
11.97
10.3 (10.300 kcal/kg)
0.77 - 0.83
6 (1.5 °E - 6 cSt)
MODEL P 140 T/G P 200 T/G P 300 T/G P 450 T/G
Electrical supply 3N ~ 50 Hz 400 V
3 ~ 50 Hz 230 V
Electric motor* rpm
W
V
A
2860
3
230/400
13.5/8
2910
4
230 - 400
14 - 8.1
2910
9.2
220 - 380
31.5 - 18.2
2920
15
400 - 690
29 - 16.8
Ignition transformer Prim.: 2 A - Sec.: 2 x 6.5 kV - 35 mA
Absorbed electrical power kW 5.3 5.4 11.1 17.3
Electrical protection IP 40
MODEL P 140 T/G P 200 T/G P 300 T/G P 450 T/G
Electrical supply 3N ~ 50 Hz 400 V
3 ~ 50 Hz 230 V
Electric motor * rpm
W
V
A
2920
3
230/400
13.5/7.8
2920
4
230 - 400
13.5 - 7.8
2920
9.2
230 - 400
29.1- 16.8
2920
15
400 - 690
26.6 - 15.4
Ignition transformer Prim.: 2 A - Sec.: 2 x 6.5 kV - 35 mA
Absorbed electrical power kW 5.2 5.3 11.0 17.3
Electrical protection IP 40
mm ABCkg
P 140 T/G 1500 905 930 130
P 200 T/G 1500 905 930 220
P 300 T/G 1780 990 1085 238
P 450 T/G 1780 990 1085 300
To Next Page
Loading...
