Riello RS 68/EV BLU - 5.12.2 Motor Cable Shield; Revolution Sensor Adjustment

31
20068463
GB
Installation
5.12.2 Motor cable shield
Key (Fig. 29)
1 Power supply cable (from the inverter)
2 Single-phase power supply cable
3 Connecting cable between the inverter and the
REC 37.400A2 electronic cam
5.12.3 Revolution sensor adjustment
WARNING
It is important to shield the motor cable 1) as indi-
cated in Fig. 29.
1
2
3
Fig. 29
D12115
WARNING
The connection from the inverter to the
REC 37.400A2, electronic cam, must be per-
formed as indicated in 3)(Fig. 29).
WARNING
The distance between the rpm sensor 1)(Fig. 30)
and the disc 2) must be observed!
WARNING
It is important that the disc 2) is installed on the
burner as indicated in Fig. 31.
2mm
1
2
Fig. 30
D12114
Fig. 31
D9408
2