To Next PageTo Next Page
Need help?Do you have a question about the Riello Vokera EASI-HEAT i and is the answer not in the manual?
Key components integrated into the boiler's electronic control board.
Describes functions active when the boiler is not actively heating or providing DHW.
Explains the sequence of operations during central heating requests.
Explains the sequence of operations during domestic hot water requests.
Details the various safety mechanisms ensuring safe boiler operation.
Information on pump performance and flow rate capabilities.
Guidance on selecting a safe and appropriate location for the boiler.
Requirements for gas supply pipework size and testing.
Guidelines for correct flue system location and installation.
Details on electrical connection, isolation, and earthing requirements.
Recommendations for system water treatment and inhibitor use.
Guidance on selecting a safe location for the boiler in Ireland.
Requirements for gas supply pipework size and testing in Ireland.
Guidelines for correct flue system location and installation in Ireland.
Electrical connection and safety requirements in Ireland.
System water treatment recommendations in Ireland.
Steps for preparing the mounting location and marking holes.
Instructions for installing various types of flue systems.
Procedures for connecting gas, water, and condensate pipes.
Procedures for connecting the boiler to the electrical supply.
Steps for safely removing and refitting the appliance casing.
Detailed instructions for connecting the 230V mains power supply.
Checks for gas supply, tightness, and purging before commissioning.
Procedure for filling the heating system and checking pressure.
Essential checks before starting the boiler, including gas, flue, and clearances.
Steps for initial commissioning, including filling the siphon and first ignition.
Detailed explanation of the boiler's LCD display and button functions.
Guide to setting passwords and modifying boiler operating parameters.
Procedure for checking and adjusting CO2 and CO levels for efficient combustion.
Identifying and reporting boiler faults using error codes and icons.
Procedures for cleaning the primary heat exchanger and burner.
Focus on ensuring the appliance is safe and performing to specification.
Specific checks and visual inspections for annual maintenance.
Importance of using genuine spare parts and fault-finding assistance.
Instructions for connecting external controls to the boiler wiring.
Contacting manufacturers for information on other control devices.
Procedure for converting the boiler from natural gas to LPG.
Detailed procedure for checking combustion ratios during commissioning.
Importance of completing the Benchmark checklist for warranty validation.
The official checklist form for recording installation and commissioning details.
General