To Next PageTo Next Page
Need help?Do you have a question about the Riello Vokera VIBE MAX and is the answer not in the manual?
Legal requirement for gas appliance installation by competent person.
Ensure correct connection to electrical supply with double pole isolator or un-switched socket.
Register appliance warranty online or by phone to obtain confirmation code.
Benchmark checklist must be completed by installer for warranty validation.
Boiler heats water for radiators and hot water, controlled electronically without a pilot light.
Provides physical dimensions and minimum clearances for safe operation and maintenance.
Details the functions of control panel buttons for navigation and operation.
Explains various icons and symbols displayed on the control panel.
Steps to access and modify parameters at the user level.
Steps to access and modify parameters at installer and service levels.
Step-by-step process for changing parameter values.
Key points to check before powering on the appliance.
Step-by-step instructions for initial boiler start-up and operation.
Describes how to switch between operating modes and what the display shows.
Procedure for adjusting the desired heating temperature.
How to adjust heating setpoint when using an external temperature sensor.
Procedure for adjusting the desired domestic hot water temperature.
Explains the safety stop function and how to reset alarms.
Instructions for switching the boiler off for short absences.
Steps for safe shutdown when the boiler is not used for a long time.
How to lock and unlock the control panel buttons.
How to view and understand past alarm events.
How to activate/deactivate the function to prevent accidental modification of DHW setpoint.
Detailed explanations of specific fault codes like A40, A60, and A91.
How to reset the boiler after a fault condition.
Actions to take if a gas leak is suspected, including contacting authorities.
Advice on investigating frequent system topping-up, possibly indicating a leak.
Guidance on arranging annual servicing and what information to provide when calling for technical assistance.
Overview of the manual's purpose, compliance, and important notes.
Diagram identifying key components of the boiler.
Lists the main components and features of the VIBE MAX boiler.
Describes how the boiler functions in heating, hot water, and standby modes.
Lists the safety features integrated into the boiler for safe operation.
Technical specifications for central heating performance.
Technical specifications for domestic hot water performance.
Details gas pressure requirements, dimensions, and clearances.
Specifications for pipe connections and electrical power consumption.
Specifications for flue lengths and energy efficiency ratings.
Information on CO2, CO, NOx emissions and energy consumption.
Technical parameters related to energy efficiency and consumption.
Information on optional devices like outdoor sensors and control panels.
Explains pump performance and variable speed circulator function.
Details on the modulating circulator function in heating mode.
Lists relevant British Standards and regulations for installation.
Safety advice regarding PPE and guidelines for selecting a safe boiler location.
Requirements for gas supply, flue system installation, and air supply.
Recommendations for water circulation, expansion vessel, and drain points.
Methods for initial system filling, low pressure systems, and frequent filling.
Requirements for electrical connection, fuse, and mounting on combustible surfaces.
Specific installation advice for timber-framed buildings and water treatment recommendations.
Requirements for showers and the Declaration of Conformity document.
Lists relevant Irish Standards and regulations for installation.
Safety advice regarding PPE and guidelines for selecting a safe boiler location in Ireland.
Requirements for gas supply and flue system installation in Ireland.
Notes on air supply and recommendations for water circulation in Ireland.
Details on filling the system and electrical supply requirements in Ireland.
Guidance on mounting, timber buildings, and water treatment in Ireland.
Requirements for showers and the Declaration of Conformity document in Ireland.
Steps for marking and preparing the wall for appliance installation.
Instructions for connecting the flue system to the appliance.
Specific guidance for installing concentric horizontal flue kits.
Detailed steps for fitting the horizontal flue kit and terminal.
Instructions for extending the flue system with additional bends or extensions.
Specific guidance for installing concentric vertical flue kits.
Steps for connecting the gas, cold water inlet, hot water outlet, and flow/return pipes.
Guidance on connecting the safety valve discharge pipe and condensate drain.
Requirements for connecting and routing the condensate drain pipe and exhaust.
Instructions for connecting the boiler to the mains electricity supply.
Details on connecting external controls like thermostats to low voltage terminals.
Procedure for removing the appliance casing for access.
Detailed instructions for connecting the 230V mains power supply.
Covers gas supply checks, system flushing, and initial filling.
Step-by-step guide for filling the heating system and flushing.
Essential checks before start-up and final checks after commissioning.
Procedure for initial siphon filling and explanation of the high efficiency mode.
Explains the layout of the control panel and the functions of various buttons.
Explains various icons and symbols displayed on the control panel.
Steps for entering passwords and choosing parameters.
Step-by-step process for changing parameter values and interpreting key presses.
Step-by-step instructions for initial boiler start-up and the venting cycle.
How to switch between operating modes (OFF, SUMMER, WINTER) and view status.
Procedures for adjusting the desired heating and domestic hot water temperatures.
How to enable and configure thermoregulation with external probes and different control requests.
Guidance on selecting the appropriate thermoregulation curve.
How to enable night-time compensation for ambient thermostats.
Explanation of the DHW pre-heating function and other special DHW functions.
How to activate/deactivate the function to prevent accidental modification of DHW setpoint.
Explanation and activation of the screed heater function.
Procedure for checking and adjusting CO2 values for optimal combustion.
Steps to set the maximum fan speed for combustion analysis.
Steps to set the minimum fan speed for combustion analysis.
Steps for calibrating the gas valve based on CO2 readings.
How to adapt the boiler's heating output to system requirements.
Lists error codes, their meanings, and associated icons for troubleshooting.
Explains the safety stop function and how to reset alarms.
Details specific fault codes and their reset procedures.
How to lock and unlock the control panel buttons.
How to view and understand past alarm events.
Guidance on reprogramming parameters after replacing the main PCB.
Instructions for switching the boiler off for short or long periods.
Parameters configurable by the user.
Parameters configurable by the installer.
Parameters configurable by service personnel.
Descriptions for parameters like measurement unit, hydraulic config., and pressure transducer.
Descriptions for parameters related to fan speed and ignition adjustment.
Descriptions for parameters controlling heating and DHW temperatures and hysteresis.
Descriptions for parameters related to thermoregulation and DHW special functions.
Descriptions for parameters like building type, sensor reactivity, and service call functions.
Lists parameter names and their descriptions accessible via the INFO menu.
Final checks to ensure safe and correct installation and operation.
Guidance on explaining appliance operation, isolation, and maintenance to the user.
Detailed steps for cleaning the primary heat exchanger and associated components.
Detailed steps for cleaning the boiler burner assembly.
Instructions for replacing the burner insulation panel.
Instructions for cleaning the condensate siphon and its components.
Importance of Benchmark Service Record and using genuine spare parts.
Focus of routine maintenance on safety, operation, and performance.
How the appliance signals cleaning needs and advice on component replacement.
Instructions for connecting the Bluetooth clock module and external controls.
Guidelines for routing cables and connecting outside sensors.
Advice on control compatibility and important electrical safety notes.
Details on configuring and using the RTC Bluetooth module via the Easi-Connect app.
Instructions for obtaining and setting up the Easi-Connect mobile application.
Explanation of operating modes and how to program heating schedules.
Diagram showing the main PCB and its connections.
Diagram showing connections for various accessories.
LPG specific technical data and relevant standards.
Procedure for converting the boiler from natural gas to LPG or vice versa.
Final checks and requirements after gas conversion or adjustment.
Pre-checks before performing the CO and combustion ratio analysis.
Instructions for setting boiler rates and performing combustion checks.
Checks for building regulations compliance and Boiler Plus options.
Checks related to water quality, inhibitor, and system balancing.
Recording of central heating output and temperatures.
Checks relevant only to combination boilers, like hard water areas.
Recording of domestic hot water output and temperatures.
Confirmation of correct condensate drain installation.
Checks for flue integrity, controls demonstration, and literature handover.
Information about the service provider and using specified spare parts.
Section for recording details of boiler servicing, checks, and part replacements.
Details Vokèra's responsibilities and what is not covered by the warranty.
How the warranty period starts and the necessity of annual servicing.
Warranty terms for accessories and information on contacting Customer Care.
Safety considerations for engineers attending site installations.
Conditions under which the warranty is voided or a callout fee may be charged.
Contact information for Vokèra and details on consumer rights.
General