Rigol DG811 - To Set Parameters

RIGOL Chapter 2 Front Panel Operations
2-22 DG800 User's Guide
ASecPro
Protuberant arc secant
ASecH
Arc hyperbolic secant
ASin
Arc Sinc
ASinH
Arc hyperbolic sine
ATan
Arc tangent
ATanH
Arc hyperbolic tangent
Bartlett
Bartlett window
BarWin
Modified Bartlett-Hann window
Blkman
Blackman window
BlkmanH
Blackman-Harris window
BohWin
Bohman window
Boxcar
Rectangular window
ChebWin
Chebyshev window
FlatWin
Flat Top weighted window
Ham
Hamming window
Hanning
Hanning window
Kaiser
Kaiser window
NutWin
Nuttall-defined minimum 4-term
Blackman-Harris window
ParWin
Parzen window
TayWin
Taylor window
Triang
Triangle window (Fejer window)
TukWin
Tukey (tapered cosine) window
To Set Parameters
After selecting the desired waveform, you are automatically directed to the waveform
parameter setting interface.
1. Freq/Period: sets the output frequency/period of the arbitrary waveform.
2. Ampl/HighL: sets the output amplitude/high level of the arbitrary waveform.
3. Offset/LowL: sets the output offset/low level of the arbitrary waveform.
4. Phase: sets the output start phase of the arbitrary waveform.
Please refer to "To Output Basic Waveform" to configure the parameters and
output for the channel.