Rigol DL3000 Series

RIGOL Chapter 3 Application Instances
3-2 DL3000 Programming Guide
(15)
:SOUR:LIST:SLEW 2,0.2
/*Sets the slew rate at Step 3 to be 0.2 A/μs.*/
(16) :TRIG:SOUR MANU
/*Sets the trigger source of the load to be manual. Pressing the TRAN
key can enable the trigger.*/
(17)
:SOUR:INP:STAT 1
/*Sets the input of the load to be on.*/