Rigol DP800 Series Calibration Guide

RIGOL
II DP800 Calibration Guide
Document Overview
This manual gives a detailed introduction of the calibration notices and calibration
process of DP800.
Subjects in this Manual
Chapter 1 Calibration Notices
This chapter gives a detailed introduction of the recommended calibration interval,
calibration safety, the method to stop the calibration and the related information, the
method to acquire the calibration service, the recommended test devices and the
notices during the test.
Chapter 2 Calibration Process
This chapter gives a detailed introduction of the calibration interface and the
calibration process of each calibration item of DP800.
Format Conventions in this Manual
1. Button:
The button at the front panel is denoted by the format of “Button Name (Bold) +
Text Box” in the manual, for example, Utility represents the “Utility” button.
2. Menu:
 The menu item can be denoted by the format of “Menu Word (Bold) +
Character Shading”, for example, I/O Config denotes the “I/O Config”
item under Utility.
 The menu item can be denoted by the screenshot of the menu key, for
example,
.
3. Operation Step:
The next step of the operation is denoted by an arrow “” in the manual. For
example, Utility  I/O Config represents pressing Utility at the front panel
and then pressing the menu item I/O Config.

Rigol DP800 Series Specifications

General

Brand	Rigol
Model	DP800 Series
Category	Power Supply
Language	English