Appendix RIGOL
DP800 Performance Verification Manual
Non-operating: below 15 000 meters
Cooling Method Fan Cooling
Note
[1]
: The accuracy parameters are acquired via calibration under 25℃ after 1-hour warm-up.
Note
[2]
: When DP832 is installed with the accuracy option, its resolution is the same as that of DP832A.
Note
[3]
: The maximum time required for the output to change accordingly after receiving the APPLy and SOURce
commands.
Note
[4]
: The variation of the output within 8 hours after 30-minute warm-up when the load circuit and environment
temperature are constant.
To Previous Page
Loading...
Need help?
General
