EasyManuals Logo

Rigol DS1104Z User Manual

Rigol DS1104Z
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background image
RIGOL
MSO1000Z/DS1000Z Quick Guide
III
Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or electric shock, please do not
operate in a humid environment.
Do Not Operate in an Explosive Atmosphere.
In order to avoid damages to the device or personal injuries, it is important to operate the device
away from an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid the influence of dust and/or moisture in air, please keep the surface of device clean and
dry.
Electrostatic Prevention.
Operate in an electrostatic discharge protective area environment to avoid damages induced by
static discharges. Always ground both the internal and external conductors of the cable to release
static before connecting.
Proper Use of Battery.
If a battery is supplied, it must not be exposed to high temperature or in contact with fire. Keep it
out of the reach of children. Improper change of battery (note: lithium battery) may cause
explosion. Use RIGOL specified battery only.
Handling Safety.
Please handle with care during transportation to avoid damages to buttons, knob interfaces and
other parts on the panels.

Other manuals for Rigol DS1104Z

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rigol DS1104Z and is the answer not in the manual?

Rigol DS1104Z Specifications

General IconGeneral
Bandwidth100 MHz
Channels4
Sample Rate1 GSa/s
Waveform Capture Rate30, 000 wfms/s
Vertical Sensitivity1 mV/div to 10 V/div
Time Base Range5 ns/div to 50 s/div
Vertical Resolution8 bits
InterfaceUSB Host, USB Device, LAN, AUX
Display7 inch TFT LCD (800 x 480)
Trigger TypesEdge, Pulse, Video, Slope
Power Supply100-240 V, 45-440 Hz
Memory Depth24 Mpts (Single Channel), 12 Mpts (Dual Channel)

Related product manuals