Need help?Do you have a question about the Rigol MSO7054 and is the answer not in the manual?
General| Brand | Rigol |
|---|---|
| Model | MSO7054 |
| Category | Test Equipment |
| Language | English |
Essential safety precautions to prevent injury and equipment damage.
Warning against touching exposed components when the unit is powered on.
Instruction to avoid operating the instrument with covers or panels removed.
Guidelines for operating in an electrostatic discharge protective environment.
Highlights the key specifications and capabilities of the MSO7000/DS7000 series oscilloscopes.
Guidance on connecting passive, active, and logic probes to the oscilloscope.
Instructions for compensating probes to ensure accurate measurements.
Detailed steps for safely replacing a blown fuse.
How to set the voltage per division for accurate vertical measurement of waveforms.
Procedure to shift the waveform vertically to center it or adjust its position relative to ground.
How to set the time per division for controlling the horizontal scaling of waveforms.
Steps to move the waveform horizontally to align the trigger point or view specific time segments.
How to select the signal source (analog, digital, external, AC line) for triggering.
How to set the trigger level or threshold for capturing specific signal events.
Explanation of trigger modes (Auto, Normal, Single) for controlling acquisition behavior.
Overview of available trigger types, including edge, pulse, slope, and serial protocols.
Steps to activate or deactivate the pass/fail testing feature.
How to initiate and halt the pass/fail testing process.
Procedure for defining a mask region on the screen or using cursors to specify pass/fail criteria.
How to search for specific trigger events or patterns within recorded waveforms.
How to navigate through recorded waveforms using playback, time, and event controls.
How to generate standard waveforms like Sine, Square, and Ramp.
Steps to define, save, and output custom arbitrary waveforms.
Procedures for saving and loading settings, waveforms, and images to/from internal memory.
Procedures for saving and loading files to/from external USB storage devices.
How to restore the oscilloscope to its default factory configuration.
How to configure USB, LAN, and GPIB interfaces for remote control.
How to configure and use shortcut functions for frequently used operations.
Procedure for performing self-calibration to ensure accurate measurement results.
How to lock or unlock the front-panel keys for security or to prevent accidental changes.
Step-by-step guide for establishing remote control connection via LAN.
Step-by-step guide for establishing remote control connection via GPIB.
Step-by-step guide for establishing remote control connection via USB.
Solutions for issues related to the instrument failing to power on or launch.
Troubleshooting steps for power-related issues where the power indicator is off.
Guidance on diagnosing and resolving issues where no signal waveform is visible on the display.
Troubleshooting steps for problems with USB storage device recognition.
Solutions for issues related to the touch screen's responsiveness or functionality.
To Next Page
