Rigol RSA Series - Page 15

Chapter 1 Quick Start RIGOL
VNA User Guide 1-3
configure network parameters.
: unlocks the front panel keys; : locks the
front panel keys.
: unlocks the touch screen; : locks the touch
screen.
: indicates that no USB storage device is
inserted; : indicates that a USB storage device
has been inserted.
6
Measurement bar
Displays measurement settings.
7
Measurement
function
Displays the currently selected measurement
function.
8
Working mode
Displays the currently selected working mode.
9
Function keypad
Clicks the keypad to display the function keypad
interface.
10
Time
Displays the system time.
11
Menu title
Displays the currently selected menu name.
12
Menu item
Displays the menu item of the current function.
13
Menu page
Shows the current page and the total number of
pages for the menu.
14
Trace 4 window
Displays the waveform or data of Trace 4.
15
Active function area
Displays the current parameter and its value.
16
Trace 3 window
Displays the waveform or data of Trace 3.
17
Trace 2 window
Displays the waveform or data of Trace 2.
18
Trace 1 window
Displays the waveform or data of Trace 1.
Note
[1]
: The definition for the calibration status is shown below:
⚫ --- (in gray): no user calibration data is available.
⚫ Cor (in blue): user calibration data are normal.
⚫ C! (in blue): the system is performing calibration operation.
⚫ C? (in blue): re-calibration is required.
Remarks: When the calibration status shows "C?", it indicates that the current settings
for sweep frequency range, sweep points, power level, IF BW, and other parameters are
different from the values set for performing the calibration, users are required to restart
to perform the calibration under the current configurations.
Note
[2]
: The display of the trace indicator is shown in the following figure:
⚫ The first line displays the trace number. The color of the number is the same as that of
the trace.
⚫ The second line displays the trace type, including W (Clear/Write), A (Trace Average), M
(Maximum Hold), and m (Minimum Hold). The letters with different colors and in
different forms show different meanings.
— The letter in blue indicates that the trace is updating.
— The letter in gray indicates that the trace is not updated.
— The letter with strikethrough and in gray color indicates that the trace will neither
be updated nor displayed.
Trace Number
Trace Type
Trace Math Function