3. Locate the “Mobile” folder and inside the
“windowsmobile.cab” (Bluetooth input driver)
CAB file.
4. Open ActiveSync on your desktop and Click
5. Copy the CAB file to your mobile device. You
can do this by dragging and dropping the file
from the desktop folder to My Documents
folder on your device.
6. On the device,click on Start,Program,File
7. Run the windowsmobile.cab file by taping on
8. The Bluetooth keyboard drivers will install on
9. After your device is reset,ensure the
keyboard is in pairing mode.
10. On the device open”Bluetooth Devices”and
11. After the keyboard is discovered,select it and
12. When prompted for the passkey leave the
field blank and click on”Next”if the pairing
fails,repeat this step and use”0000”as the
passcode.
13. Ensure”Input Device”is checked and tap
14. Go to the Software settings panel and tap
on”Connect”
Troubleshooting:
The software is not responding.You need to
reinstall this software-This error is caused by a
problem with the communication between the
software components.Check to ensure your
Windows Mobile Device is supported by the
To Next Page
Loading...
