Rii K03BT - Windows os(Broadcom Bluetooth Stack)

Windows OS(IVT Bluetooth Stack)
Setup
1. Make sure that Bluetooth is enabled on your
PC.
2. Double click on the Bluetooth icon and
select”Bluetooth Device Discovery”.
3. Right click on the Bluetooth keyboard found
and click on”Refresh Services”.
4. Right click on the Bluetooth keyboard and
select”Connect-Bluetooth Input Service”.
5. A popup dialog will appear with a code.Input
this code to the keyboard and press OK.The
system will automatically install the drivers
for the keyboard.
Windows OS(Broadcom Bluetooth stack)
1. Make sure that the Bluetooth function
is active on your PC. Double click the
Bluetooth icon, then click “View
devices in range”
2. Click “Search devices in range” and
wait until the Mini Bluetooth keyboard
is discovered.
3. Right clicking the detected
keyboard brings a popup menu.
Click “Connect device”.
4. Press YES to connect to the “Human
interface Device”
5. Using the Mini Bluetooth keyboard,
type the number displayed on the
screen, then press enter.