RIKA NEX - Assembly and Dismantling Stone; Stone Assembly;Disassembly

|11
10
EN
5. ASSEMBLYDISMANTLING STONE
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled down completely.
Type Rikatronic4: Only work on the unit when it is switched off and
the mains plug has been disconnected.
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments. Select soft bases to
prevent scratches to your living space furniture and stove panels.
Assembly / disassembly stone
If you open the combustion chamber door, you have better access
to the stone. Lift up the top stone with a second person, he is just laid
on the stove.
Remove the bolts which secure the stone on one side only. Caution,
the stone can tilt outwards!
Tilt the stone carefully slightly outward and lift it off the bottom bolts.
Place the stone flat on a soft base. The stone should never be placed
on the edges - risk of breakage!
Remove the locking bolts and the stone from the other side the same
way.