Need help?Do you have a question about the RIKA INDUO and is the answer not in the manual?
General| Type | Wood Stove |
|---|---|
| Nominal Heat Output | 8 kW |
| External Air Connection Diameter | 80 mm |
| Log Length | 33 cm |
| Material | Steel |
| Airwash System | Yes |
| Secondary Combustion | Yes |
| Fuel Type | Wood |
| Flue Outlet | 150 mm |
| Power Output | 6 kW |
| Glass Type | Ceramic |
Critical warnings and safety guidelines to ensure safe operation and prevent hazards.
Specifies required clearance distances around the stove for safe operation.
Essential checks and considerations before proceeding with the stove installation.
Details on how the stove achieves high efficiency and low emission levels.
Explanation of safety mechanisms, including burnback and flue gas flaps.
Information on the overheating safety feature and its activation.
Information on the auger motor monitoring and potential error causes.
Instructions for connecting the stove to an approved chimney system.
Specific guidance for connecting the stove to a steel chimney.
Information on the importance and provision of combustion air for the stove.
Instructions for connecting an external source of combustion air.
Detailed steps for the initial setup and putting the stove into operation.
Initial actions required upon first use, including date and time setting.
Procedure for activating the safety devices burnback and flue gas flap.
Detailed explanation of the different pellet operation modes and their settings.
Instructions for operating the stove using logs, including heating up.
Manual control of log operation using a spanner for adjustments.
How the stove automatically switches between pellet and log operation.
Displays and actions for various warning messages indicating operational issues.
Displays and actions for error messages indicating component malfunctions.
Instructions for cleaning the fire trough and ensuring air inlets are clear.
Steps for cleaning the flue pipes and heat exchangers.
Troubleshooting steps for a weak flame, sooted window, and pellet issues.
Troubleshooting steps for strong smells, fumes, and accumulated dust.
Troubleshooting steps for flue gas discharge when adding logs or during heating.
To Next Page
