7. ASSEMBLY/DISMANTLING STONE AND OPTIONS
Note
Only work on the unit when the mains plug has been disconnected and the
stove has cooled completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to fall into
the pellet container – they can block the screw conveyor and damage the
stove.
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments.
Select soft bases to prevent scratches to your living space furniture and
stove panels.
Dismantling stone
Lift the cover of the stove by carefully pressing upwards and place it on a soft,
clean base.
Open the container lid to the stop, it remains open in this position.
Open the two hex head bolts using a suitable socket spanner and remove the
stone holder.
Tip the stone slightly forwards and lift it out of the floor bracing. Pay attention to
the edge of the stone to prevent damage. Place the stone on a suitable base.
Re-assemble the parts in reverse order.
#8
To Next Page
Loading...
