RIKA PREMIO - Page 19

ENGLISH
19
By pressing the “+” or “-” keys the current
hour of the internal clock can be set. The
desired value is confirmed with “ENTER”
and is then saved. The display shows
“M” = Minutes, the number
indicates the minutes
(value range 0 to 59).
Set the minutes of the system clock to the
correct value by pressing the “+” or “-” keys
and confirm with “ENTER”. The value is
then saved and the display shows:
“D” = Day, the number
indicates the weekday, e.g. see
window 3 = Wednesday.
Set the current weekday (1 = Monday, 2 =
Tuesday, 3 = Wednesday, 4 = Thursday, 5 =
Friday, 6 = Saturday, 7 = Sunday) by pressing
the “+” or “-” keys and confirm the new
value by pressing “ENTER”. The value is
then saved and on pressing “MENU” the
display shows:
“RI” = Rings
The number of ring tones can be
set from 1 to 10.
By pressing the “+” or “-” keys the number
of rings can be changed. Press “ENTER” to
confirm and the value is then saved and the
display shows:
“PN1” = PIN 1
(Personal Identification Number).
The number 0 (see window) represents the
first digit of the PIN code (0 - 9 possible):
M
47
RI
7
Select the desired value by pressing the “+”
or “-” keys and confirm with “ENTER”. The
display then shows:
“PN2” = PIN 2
The number 8 (see window)
represents the second digit of the
PIN code:
Press the “+” or “-” keys to select the
required value and confirm with “ENTER”,
the display then shows:
“PN3” = PIN 3
The number 1 (see window)
represents the third digit of the
PIN code:
Press the “+” or “-” keys to select the
required value and confirm with “ENTER”,
the display then shows:
“PN4” = PIN 4
The number 5 (see window)
represents the fourth digit of the
PIN code:
Press the “+” or “-” keys to select the
required value and confirm with “ENTER”.
Then select “MENU” and you return to the
main menu and the display shows:
“SB” = Standby
Now the stove has been
programmed according to your individual
requirements you can set it to manual
mode (ON mode) by a single press on the
“ENTER” key or to automatic mode (TM
mode) by double pressing the “ENTER” key
PN
2 8
PN
3 1
SB
D
3
a) if the optional Tele-control is installed
PN
1 0
PN
4 5
b) if the optional Tele-control is installed