ENGLISH
20
Ensure that when the stove is in ON mode the
heating operation starts after 10 seconds. In
automatic mode (TM) the heating process
starts in accordance with the programmed
heating times.
MAIN MENU – OPERATING RANGES
According to your requirements you can
choose one of the following three opera-
ting types:
➧ Standby mode
“SB” = Standby
Stove is switched off but remains
active for control by Tele-Control
(mobile).
➧ Manual operation
“ON” = Manual operation
The number equals the heating
output in percent (0% is minimum
output and 100% is maximum
heating output).
➧ Automatic operation
“TM” = Automatic operation
(Time mode)
The number equals the heating
output in percent (0% is minimum
output and 100% is maximum
heating output.
You can switch between the various opera-
ting types by pressing “ENTER”
SB
ON
70
TM
85
Start manual operation.
The following flashing indicators appear
alternately on the display
“ST” indicates start
The number below indicates the remaining
time for the start process in minutes.
On completion of the start phase the follo-
wing appears continuously on the display
“ON” = Manual operation
If you want to change the current heating
output then you can set the required hea-
ting output in 5% steps (from 0 to 100) by
pressing the “+” or “-” keys.
ST
21
ON
70
ON
70
To Next Page
Loading...
