RIKA PREMIO - Shut down Unit from Automatic Operation; Automatic Stop Controlled by Heating Time; Automatic Stop, Manual; Shut down by Operating Mode in Standby

To Next Page

To Previous Page

ENGLISH

On completion of the switch off program

the display goes off. When the “ON/OFF

key is pressed a re-start follows.

SWITCHING OFF STOVE AUTOMATIC

OPERATION

Heating time controlled automatic stop

If during automatic operation the “PE” out-

put is switched to OFF, then the stove will

be switched off at the end of a heating time

as per the above-described functions.

The difference to manual switch off is that

TM is displayed instead of ON.

On completion of the switch off process

the following is displayed:

“TM” = Automatic operation

(Time mode)

OFF switches off heating operation.

A pre-programmed heating time re-sets

the stove automatically in operation and

the user can manually change to the ON

mode (e.g. if currently a heating require-

ment outside the programmed heating

times is required).

Manual automatic stop

If during automatic operation the

“ON/OFF” key is pressed the stove goes

immediately into switch off operation. The

same indication as described previously is

displayed. On completion of the exit pro-

gram the display switches off and the stove

can be re-switched to automatic mode by

pressing the “ON/OFF” key.

OFF

SWITCHING OFF BY CHANGING OPE-

RATING MODE IN STANDBY

If you change to the Standby mode by pres-

sing the “ENTER” key in “Manual opera-

tion” and in automatic operation, then

switching off as described in the process

above will be carried out. On completion

of the switching off program the following

display appears:

“SB” = Standby

To re-start the stove a corresponding mode

must be selected or the stove must be star-

ted with the optional Tele-Control (tele-

phone start).

PELLET CONTROL (OPTIONAL) ROOM

TEMPERATURE SENSOR

Using the external operating unit your pel-

let stove functionality can be extended by

the room temperature control. This means

that the room temperature is measured by

a sensor in the external operating unit.

The function is not part of the standard

delivery and can be retro-fitted if desired.

The corresponding extended functions of

the stove and the programming of the

system values are contained in the retro-fit-

ting instructions.

TELE_CONTROL (TELEPHONE CON-

TROL OPTIONAL)