RIM Proton - Registering with the Network

Getting started — Registering with the network
Proton — User’s Guide
17
To turn off the radio
It is especially important to remember to turn off your Proton’s
radio when on an airplane, or at times when it may interfere with
other radio transmissions.
In the
+RPH
screen, scroll to and click the
7851 5$',2 2))
icon
on the functions list.
The airplane icon changes to an antenna icon. The Proton’s radio
will be turned off and coverage will be registered as ‘
OFF
’.
Registering with the network
When you first turn on the radio, the Welcome messages will be
sent to the Proton, provided that you are properly registered with
the network and are within coverage (as indicated by the bars
beside the antenna icon in the top right corner of the
+RPH
screen).
In rare cases, you may need to manually register your Proton if the
Welcome messages do not arrive.
1. In the
+RPH
screen, scroll to and click the
237,216
icon on the
functions list.
2. The
'HYLFH 2SWLRQV
screen appears. Scroll to and click
Network
Settings
.
3. In the
1HWZRUN 6HWWLQJV
screen, ensure that the
Roaming:
field
is set to your country (
U.S.
or
Canada
) and that the
Radio:
field is set to
On
. Verify that the
Status:
field is set to
Active
.