Proton — User’s Guide
Getting started — Sending a message
22
4. Click the trackwheel to view the menu. Select
Save Address
by
clicking again.
5. You return to the
7R
screen with your new contact selected.
Click the trackwheel to view the menu where you can select a
send method. (For this exercise, choose
Use Email
.)
6. Type a subject line and press
ENTER
to begin typing your mes-
sage. When you are finished composing your message, click the
trackwheel to view the menu; select
Send Message
by clicking
again.
The
0HVVDJ HV
screen appears. You will see one of the following
icons to the left of the message header to indicate message status.
Message is being sent.
Message has been sent out to the network.
Message is pending (will be sent later). This icon
would appear if, for example, you were out of a
coverage area or the network was busy.
To Next Page
Loading...