Ring Alarm Keypad User Manual
State Parameter Value = 0xA9 (SDK
Value for Soft Fault)
Software Reset (Not
triggered by failure)
Notification Report
Type: System 0x09
State Value: 0x04 System Software
Failure
State Parameter Value = 0xAC
Notification Report
Type: 0x08 Power Management
Event Parameter: 0x01 Power has been
applied
Notification Report
Type: 0x08 Power Management
Event: 0x05 Voltage Drop/Drift
Notification Report
Type: System 0x09
State Value: 0x04 System Software
Failure
State Parameter Value = 0xAB
Yes, via Notification Set of Notification
Type 0x07, and status of
0x00: This type of notification turned off
0xFF: This type of notification turned on