ring Alarm Keypad 2nd Generation - Z-Wave Command Classes; Group Identifier

Ring Alarm Keypad User Manual
Date:
Version: 0.1
Page: - 7 -
1
Heartbeats:
This parameter is the number minutes between
heartbeats. Heartbeats are automatic battery
reports on a timer after the last event.
1
70 (0x46)
1 (0x01)
70 (0x46)
0x01
Unsigned
2
Number of application level retries attempted for
messages either not ACKed or messages
encapsulated via supervision get that did not
receive a report.
1
1 (0x01)
0 (0x00)
5 (0x05)
0x01
Unsigned
3
Application Level Retry Base Wait Time Period:
The number base seconds used in the
calculation for sleeping between retry
messages.
1
5 (0x05)
1 (0x01)
60 (0x3C)
0x01
Unsigned
4
Announcement Audio Volume
1
7
0
10
0x01
Unsigned
5
Key Tone Volume
1
6
0
10
0x01
Unsigned
6
Siren Volume
1
10
0
10
0x01
Unsigned
7
Special Key Long Press Duration
This parameter allows a user to configure the duration
in seconds for the hold time required to capture a long
press . This includes Emergency Buttons + Mode
Buttons (Police, Fire, Medical, Disarmed, Home,
Away)
1
3
2
5
0x01
Unsigned
8
Long press number pad duration (seconds)
This parameter allows a user to configure the duration
in seconds for the hold time required to capture a long
press . This includes Number Pad + Check & X (0-9,
Check, X)
1
3
2
5
0x01
Unsigned