Quick Start
Chime Pro
Démarrage rapide
Chime Pro
Inicio rápido
Chime Pro
QR+FR
1. Plug in your Chime Pro. / Branchez votre
Chime. / Enchufa tu Chime Pro.
2. Open the Ring app and select Set Up Device. /
Ouvrez l’application Ring et sélectionnez
configurer un appareil. / Abre la aplicación
de Ring y selecciona configurar dispositivo.
Then follow the in-app instructions. / Ensuite,
suivez les instructions de l’application. /
Después sigue las instrucciones de la app.
3. Scan this code. / Balayez ce code. /
Escanea este código.
This identifies your Ring device to make
setup fast and easy. / Il est unique à votre
appareil Ring et permet de faciliter et
d’accélérer sa configuration. / Esto identifica
tu dispositivo Ring para que la configuración
sea rápida y sencilla.
For additional help, visit: ring.com/help
Pour obtenir de l’aide supplémentaire, visitez : ring.com/help
Para ayuda adicional, visita: ring.com/help
IMPORTANT PRODUCT INFORMATION
Safety and Compliance Information.
Use Responsibly. Read all instructions and safety information before use.
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT
IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Chime Pro is for indoor use only. Do not expose your device to liquids. If your
device gets wet, carefully unplug the device without getting your hands wet and
wait for the device to dry completely before plugging it in again. Do not attempt
to dry your device with an external heat source, such as a microwave oven or a
hair dryer. To avoid risk of electric shock, do not touch your device or any wires
connected to your device during a lightning storm. If the device appears to be
damaged, discontinue use immediately. Do not cover the device while operating.
Do not open the housing. Protect this device from sunlight. Disconnecting the
plug will power the device o.
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment. This equipment should be installed and operated with minimum
distance 28 cm between the radiator & your body. This device complies with part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Do not defeat the safety purpose of the grounding-type plug. A grounding
type plug has two blades and a third grounding prong. The grounding prong is
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a socket on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a
Product by the user that are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The device meets the FCC Radio Frequency Emission Guidelines. Information on
the product is on file with the FCC and can be found by inputting such Product’s
FCC ID (which can be found on the device) into the FCC ID Search form available
at fcc.gov/oet/ea/fccid.
The party responsible for FCC
compliance is Ring LLC, 1523 26th
Street Santa Monica, CA 90404.
To contact Ring about the device’s FCC equipment authorization, please write
us at the address shown above or contact us using the following address:
legal@ring.com
Additional information regarding the Chime Pro FCC equipment
authorization(s) can be found at: ring.com/regulatory
Device Name: Chime Pro (2
nd
Generation)
Model: 5UM2E5
FCC ID: 2AEUPBHACP021
Electrical Rating: 100–240VAC~ 0.35A 50/60Hz
Temperature Rating: 32F to 104F (0C to 40C)
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make
sure you dispose of, or recycle, your device in accordance with your local laws
and regulations.
To Next Page
Need help?
General
Weight and Dimensions
