ring Retrofit Alarm Kit User Manual

13
Wiring up the Retrofit Alarm Kit
1. Disconnect the power to your alarm panel.
Unplug the AC power supply. The transformer may have a safety screw that
will need to be unscrewed before you can unplug it.
Disconnect the battery backup for safety. Remove both the red and black
wires from the battery terminals.
If you can’t unplug the AC power, we recommend that you switch o the
breaker at the fuse box. After you successfully disconnect the power to the
alarm panel, you can turn the breaker back on to provide lighting while
you work.
2. Choose where to mount the Retrofit Alarm Kit.
The Retrofit Alarm Kit should be mounted near the wired alarm panel box,
but not inside it. We recommend mounting it on the wall next to the wired
alarm panel. Do not mount near combustible or flammable surfaces.
3. Mount the Retrofit Alarm Kit.
We suggest that you use the included double-sided tape located on
the back of the Retrofit Alarm Kit. You can also use screws and anchors
(not included) for the type of wall you’ll be mounting it to.

ring Retrofit Alarm Kit Specifications

General

Connectivity	Z-Wave
Operating Conditions	32°F to 120°F (0°C to 49°C)
Mobile App	Ring App (iOS and Android)
Voice Control	Works with Alexa
Color	White
Compatibility	Works with Ring Alarm security system
Power Source	Hardwired
Battery Backup	Requires Ring Alarm Base Station (sold separately)