What to do if Rinnai Water Heater water will not flow on power reinstatement?
If you experience a power interruption while filling a bath and the water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
What to do if power interruption during Bath fill in Rinnai Water Heater?
If a power interruption occurs during a bath fill and water doesn't flow when power is restored to your Rinnai Water Heater, turn off all hot water taps and press the On/Off button twice.
What to do if my Rinnai B20 starts then shuts down immediately?
If your Rinnai Water Heater starts and then immediately shuts down, verify that the power is still on. Also, check that the gas isolation valves at the unit and the gas meter are fully open. Ensure your hot water tap is fully open as well.
What to do if my Rinnai B20 Water Heater has no ignition or gas supply?
If your Rinnai Water Heater has no ignition or gas supply, check that the gas is turned on at both the water heater and the gas meter or cylinder.
Why does my Rinnai B20 Water Heater start and then the water goes cold?
If your Rinnai Water Heater starts and then the water goes cold, verify that the power is still on. Also, try opening your hot water tap further.
Why does my Rinnai B20 have flame failure or low gas flow?
If you are experiencing flame failure or low gas flow with your Rinnai Water Heater, verify that the gas is turned on at both the water heater and the gas meter or cylinder. Also, check for any obstructions to the flue outlet.
What to do if my Rinnai B20 Water Heater unit does not attempt to start at all?
If your Rinnai Water Heater does not attempt to start, check that the power is on at the unit and that the isolation valves at the unit are open.
How to resolve a condensate pipe blockage in my Rinnai B20?
To resolve a condensate pipe blockage in your Rinnai Water Heater, check for any blockages on the condensate drain path.
How to fix noticeable reduction in water flow in Rinnai Water Heater?
If you notice a reduction in water flow with your Rinnai Water Heater, the inlet water filter may need cleaning. A service call is recommended.
What to do if Rinnai B20 does not start?
If your Rinnai Water Heater isn't starting, make sure the power is on at the unit and check that the isolation valves are open.
Specific installation requirement for Victorian consumers regarding licensing.
States the incompatibility of Rinnai continuous flow water heaters with solar systems.
Covers essential safety advice like checking water temperature, flue safety, and freezing precautions.
Instructions for cleaning water controllers and warnings about solvent use.
Explains temperature limits, controller priority transfer, and setting storage.
Details the factory pre-set maximum delivery temperatures for different water heater models.
Lists available temperature settings and differentiates Universal and Deluxe controller types.
Explains the MC-91Q Universal controller's features, indicators, and basic operation.
Provides guidance on connecting and managing multiple Universal water controllers.
Details the BC-100V Deluxe Bathroom controller's features, indicators, and operations.
Guides on setting audible options and configuring the controller's clock display.
Instructions for setting and adjusting the water temperature via the controller.
Explains how to use the Shower Saver and Bath Fill features for preset water volume and temperature.
Details how to stop the function and the events that occur upon its completion.
Explains the MC-100V Deluxe Kitchen controller's features and basic operations.
Guides for setting the clock and adjusting water temperature on the kitchen controller.
Covers general installation requirements including regulations, location, and pipe sizing.
Provides specific instructions for the condensate drain system for REU-KM models.
Details the procedures for installing Rinnai Universal and Deluxe water controllers.
Outlines the steps for commissioning, testing, and verifying the installed system.
Lists and describes optional accessories available for the Rinnai water heater.
Provides a section to record appliance details, retailer, and installer information.
General| Type | Tankless |
|---|---|
| Ignition | Electronic |
| Gas Type | Natural Gas or Propane |
| Fuel Type | Gas |
| Energy Factor | 0.82 |
| Ignition Type | Electronic |
| Capacity | 20 Litres per minute |
| Energy Efficiency | 0.82 Energy Factor |
| Installation | Indoor |
| Maximum Flow Rate | 20 Litres per minute |
To Next Page
