EasyManuals Logo

Rinnai CIN070R Installation Manual

Rinnai CIN070R
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Page 8
Indoor Unit Installation
4
Indoor Unit Parts
Drain pump
(within indoor unit)
Drain pipe
Air outlet
Air inlet
Display panel
Front grille
Louver
Refrigerant pipe
Fig. 4.1
Safety Precautions
WARNING
Securely install the indoor unit on a
structure that can sustain its weight. If the
structure is too weak the unit may fall
causing personal injury, unit and property
damage or death.
Install the indoor unit at a height of more
than 2.5m (8’) above the floor.
DO NOT install the indoor unit in the
bathroom or laundry room as excessive
moisture can short the unit and corrode the
wiring.
CAUTION
Install the indoor and outdoor units, cables
and wires at least 1m (3.2’) from televisions
or radios to prevent static or image
distortion. Depending on the appliances, a
1m (3.2’) distance may not be sufficient.
If the indoor unit is installed on a metal
part of the building, it must be electrically
grounded.

Other manuals for Rinnai CIN070R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rinnai CIN070R and is the answer not in the manual?

Rinnai CIN070R Specifications

General IconGeneral
BrandRinnai
ModelCIN070R
CategoryAir Conditioner
LanguageEnglish

Related product manuals