To Next PageTo Next Page
Need help?Do you have a question about the Rinnai rhfe-553ft and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | rhfe-553ft |
| Category | Air Conditioner |
| Language | English |
Appliance must be installed according to manufacturer, local regulations, and statutory requirements.
Details Rinnai's service network and how to contact them for appliance service.
Ensures clean room air by expelling combustion gases outside.
Distributes warm air evenly through louvres for effective heating.
Simplifies heater operation with a single ON/OFF switch.
Allows programming the appliance to turn on at specific times.
Heats the room to a set temperature before the programmed On Timer time.
Automatically switches off the heater after a selected delay period.
Alerts the user when the air filter requires cleaning due to dust buildup.
Shows time, room temperature, pre-set temperature, and error codes.
Prevents accidental operation and control alteration by locking controls.
Stores pre-set temperatures and timer programs for convenience.
Saves energy by reducing temperature gradually when comfort is maintained.
Instructions on how to access the heater's control panel.
Steps to start the heater and indicators for operation.
Procedure for safely switching off the heater and fan cooldown.
How to view and set desired room and pre-set temperatures.
How to enable energy-saving mode for reduced heating.
How to activate and deactivate the control lock feature.
Explanation of the automatic fan speed control for comfortable heating.
Instructions for cleaning the air filter to maintain performance.
How to fill and use the humidifier tray for increased air humidity.
Guide for adjusting the direction of warm air flow.
Lists all parts included in the appliance installation kit for verification.
Guidelines for safe placement, including flueing and air distribution.
Specifies standard installation for the flue manifold and side clearances.
Details available flue lengths and precautions for snow-prone areas.
Instructions for gas connection, wall bracket fitting, and flue positioning.
Step-by-step guide for disassembling, adjusting sleeve, and fixing components.
Continues assembly with terminal, ties, inner connections, and manifold attachment.
How to connect the air inlet hose to the flue manifold.
Guides for fitting the locking clamp, screw clamp, and insulation sleeve.
Detailed steps for checking and verifying gas pressure settings.
How to adjust gas pressure settings if they are found to be incorrect.
Steps for securing the heater to the wall and replacing the fan filter.
Instructions for explaining operation and handling faults to the customer.
