To Next PageTo Next Page
Need help?Do you have a question about the Rinnai i060C and is the answer not in the manual?
General| Model | i060C |
|---|---|
| Type | Condensing Boiler |
| Fuel Type | Natural Gas or Propane |
| Heating Capacity (Maximum Input) | 60, 000 BTU/h |
| Modulation Ratio | 4:1 |
| Heat Exchanger Material | Stainless Steel |
| Efficiency | 95% |
| Water Connection Size | 3/4 inch NPT |
| Vent Diameter | 2 inch |
| Minimum Input | 15, 000 BTU/h |
Requirements and skills for qualified professional installers.
Lists crucial safety precautions for installers and consumers.
Provides detailed technical specifications for different boiler models.
Outlines general guidelines and code compliance for boiler installation.
Details the necessary clearances around the boiler for safe installation and servicing.
Provides step-by-step instructions for mounting the boiler to the wall.
Instructions on how to fill the condensate collector before operation.
General guidelines for proper boiler venting installation and compliance.
Details the sequence of steps for installing the venting system.
Details termination clearances for direct vent installations (Concentric and Twin Pipe).
Step-by-step guide for installing concentric vent pipes.
Step-by-step guide for installing twin pipe venting systems.
Discusses requirements for providing adequate combustion air for room air installations.
Step-by-step guide for installing room air venting systems.
Details the steps for safely connecting the gas supply to the boiler.
Provides instructions for safe operation and shutdown of the gas supply.
Offers tables and a worksheet for sizing gas pipes according to codes.
Step-by-step instructions for connecting the domestic hot water supply.
Step-by-step instructions for connecting the central heating supply and return.
Details how to connect pressure relief valves for DHW and central heating systems.
Guidelines for proper installation and disposal of condensate drain lines.
Instructions for connecting the condensate drain pipe to the boiler.
Wiring instructions for the condensate pump safety switch.
Guidelines for connecting the boiler's power supply safely and correctly.
Details how to connect various external devices to the boiler's PC board.
Safety precautions to follow during the boiler commissioning process.
Step-by-step instructions for filling the boiler system.
Detailed process for removing air from the boiler and system.
Information and requirements for the initial startup of the boiler system.
Describes the features and functions of the boiler's control panel.
Lists and explains various diagnostic codes for troubleshooting boiler issues.
Routine maintenance tasks for licensed professionals.
Instructions for converting the boiler from natural gas to propane.
