Rinnai Neo User Manual

Neo operation guide: 11907-E 05-14 | 11
A/M PWRT P
DOWN
UP
OK
Temperature display
Displays the current room
temperature.
Set temperature indicator
When the wireless controller
is on, the programmed
temperature will only be
displayed. In flame mode, only
the flame setting (F1-F7) will
display.
Time of day and day of week
Operation mode indicator
When in flame mode, the display
will be blank.
Mode button
Toggles between automatic,
manual, and flame modes.
T - Time
Initiates the time and day of the
week programming. Press and
hold for two seconds.
UP, OK, DOWN
UP/DOWN: Changes hours, minutes, day or
temperature.
OK: Accepts the current function and advances the
next function.
P - Program
Indicates programming mode.
Press and hold for two seconds.
Power button
PWR and OK pressed together
switches the wireless controller
on—child lock safety feature. PWR
switches the controller off.
Flame indicator
Indicates flame height. When in
manual or automatic modes, the
heater will switch off if the room
temperature reaches the set
temperature. When this occurs,
the flame indicator will rise and fall
every few seconds to indicate the
heater is still operational.
Battery indicator
Symbol will flash when batteries
need replacing. The wireless
controller will remain functional
for approximately five days before
shutting off.
Transmit indicator
Indicates the wireless controller is transmitting to the
receiver. The symbol will appear for in the LCD for
one second.
Wireless controller display

Rinnai Neo Specifications

General

Brand	Rinnai
Model	Neo
Category	Indoor Fireplace
Language	English