Rinstrum 300 Series - Regulatory Sealing Requirements

Rinstrum - R300 Series Digital Indicator Quick Start Manual Rev 1.5
Page 16
6.6. Regulatory Sealing Requirements
To comply with regulatory sealing requirements for each
instrument, (ie. to ensure instruments are not accidentally or
deliberately tampered with), it is important that proper sealing
procedures be adhered to.
6.6.1. R310 and R320 Sealing (R320 shown)
For the R310 and R320, affix sealing stickers to the rear of the
instrument, over one or more screws in the locations indicated.
Also affix a sealing sticker over the load cell cable where the
cable-tie strain relief is attached, as indicated.
Affix stickers in the locations indicated.