Rinstrum 300 Series Quick Start Manual

Rinstrum - R300 Series Digital Indicator Quick Start Manual Rev 1.5
Page 19
7.3. Access Full Setup
Full Setup provides access to configure and calibrate the
instrument. All items in all menus will be enabled in Full Setup.
WARNING: Care should be taken to avoid inadvertently
altering the Build or Calibration settings.
Ensure the instrument is on.
R310
• Press and hold the <POWER> and <TEST> keys
together for two seconds.
R320
• Press and hold the <POWER> and
<FUNCTION> keys together for two seconds.
7.4. Access Safe Setup
Safe Setup restricts access to the trade critical settings (marked
with ⊗).
R300 Series: Ensure the instrument is on.
• Press and hold the <POWER> and <ZERO> keys
together for two seconds.
7.5. Exit Full or Safe Setup
To save settings, exit setup and return to the normal weighing mode
use one of the following methods:
• R310: Press <POWER> and <TEST> together for two seconds
• R320: Press <POWER> and <FUNCTION> keys together for two
seconds
• R310 and R320: Press <POWER> and <ZERO> together for two
seconds or select - End - from the menus.
Warning: If the power is interrupted while in setup (ie. by
disconnecting the power cable or pressing the <POWER> key),
unsaved settings will be lost.
7.6. Settings
The following tables identify the settings available for the R300
Series.

Rinstrum 300 Series Specifications

General

Brand	Rinstrum
Model	300 Series
Category	Accessories
Language	English