Measurement
10
Measurement
1. While keeping the MEAS button depressed, hold the
vibration detector against the measurement object. Use
a pressure of about 500 g to 1 kg.
If the MEAS button is pressed while power is off, the
unit will require about 10 seconds until measurement is
possible.
2. The measured vibration value is shown on the digital
display.
3. Release the MEAS button and read the measurement
value that is being held on the display.
4. When the MEAS button is pressed again, the currently
held value is canceled, and a new measurement can be
performed.
The unit turns itself off automatically about 1 minute
after the MEAS button is released.
H
I
1
k
H z
L
O
m / s
2
m m
/
s
m m
M E A S
To Next Page
Loading...
