5
rinse mouth before eating or drinking. Do not smoke or chew gum or
tobacco in the work area.
9. Clean up all removed paint and dust by wet mopping the floors. Use a wet
cloth to clean all walls, sills and any other surface where paint or dust is
clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high
phosphate detergent or trisodium phosphate (TSP) to wash and mop
areas.
10.At the end of each work session put the paint chips and debris in a double
plastic bag, close it with tape or twist ties and dispose of properly.
11.Remove protective clothing and work shoes in the work area to avoid
carrying dust into the rest of the dwelling. Wash work clothes separately.
Wipe shoes off with a wet rag
that is then washed with the work clothes.
Wash hair and body thoroughly with soap and water.
h. Close the valve of the gas bottle when not in use for long periods of time.
i. Press the trigger to empty the gas hose and release the pressure.
j. Never heat a specific area continuously.
k. Keep the working zone clean and remove all waste (wood, paper, other
inflammable materials).
l. For all work inside professional workshops, the gas bottle must be placed on a
mobile trolley that can be manoeuvred easily.
m.SAVE THESE INSTRUCTIONS.
This user's guide must be kept for future reference.
Do not use this appliance for shrinking plastic film on materials, substances,
products or liquids that inflame spontaneously, either processed in bulk or
packed, and do not use the appliance in the storage areas of these products or
in spaces where it is explicitly forbidden to smoke for safety reasons.
Do not use this appliance for shrinking plastic film on a floor that is made of
combustible material (wood, plastic, etc.).
Close the valve of the gas bottle when not in use for long periods of time.
Press the trigger to empty the gas hose and release the pressure.
Never heat a specific area continuously.
Keep the working zone clean and remove all waste (wood, paper, other
inflammable materials).
To Next Page
Loading...
