12
The SECURIPACK automatically cuts off the
supply of gas if the pressure drops below the
minimum level necessary for the normal efficiency
of the work.
This is the case when:
•
The bottle is nearly empty (the gun can only be
used for a few more minutes at reduced power:
change the bottle);
•
The temperature of the bottle has dropped after intensive use (icing): if this is
the case, change the bottle temporarily or wait until the normal pressure
returns, especially if you are working outside (0°C / 30°F and colder).
NEVER HEAT A GAS BOTTLE WITH A FLAME.
WHEN YOU HAVE FINISHED WORKING,
ALWAYS CLOSE THE GAS BOTTLE VALVE
AND EMPTY THE HOSE BY PRESSING THE
TRIGGER.
THE COMPANY RIPACK SHALL NOT BE
HELD LIABLE IN THE EVENT THAT THE
GUN IS DISMANTLED.
Contact your dealer if the RIPACK 2200
needs to be dismantled.
Only the procedures described in the
maintenance chapter are authorised.
SPARE PARTS
To Next Page
Loading...
