3
YOU MUST READ THESE INSTRUCTIONS BEFORE USING THE
APPLIANCE.
This appliance is meant exclusively for professional use and for shrinking
plastic films.
Users of the RIPACK 2200 shrink gun must read this user's guide completely
and must be trained for the applications that require the use of this appliance.
When using the RIPACK 2200 shrink gun, basic safety precautions should
always be followed:
a. READ ALL INSTRUCTIONS.
This appliance is meant exclusively for professional use
a. Before using, check all parts for proper function and damage to component
parts.
b. Do not use this torch to heat, mold or bend plastic sheets, moulding or tubing.
c. “Hidden areas such as behind walls, ceilings, floors, soffit boards and other
panels may contain flammable materials that could be ignited by the heat gun
when working in these locations. The ignition of these materials may not be
readily apparent and could result in property damage and injury to persons.
d. When working in these locations, keep the torch moving in a back-and-forth
motion. Lingering or pausing in one spot could ignite the panel or the material
IMPORTANT NOTES
SAFETY PRECAUTIONS
1. Do not use this appliance in regulated zones where there is a
specific risk of fire or explosion.
2. Limit a working zone that is large enough to ensure that the
nozzle of the gun is always at a minimum distance of 1.5 m within
this zone and indicate that access to this zone is forbidden for all
other persons.
3. Always have a suitable fire extinguisher of an appropriate size
within reach.
4. Wear gloves when using the appliance and never wear garments
that are easily inflammable such as nylon or similar fabrics.
To Next Page
Loading...
