Need help?Do you have a question about the Ripack 2200 and is the answer not in the manual?
General| Brand | Ripack |
|---|---|
| Model | 2200 |
| Category | Power Tool |
| Language | English |
Ideal to hold and carry the gas cylinder safely, offers portability.
Heavy duty construction for industrial application, corrosion resistant.
Quick and easy assembly of one or more extension wands on the RIPACK 2200 heat gun.
Allows to make pallet covers and bags from rolls of shrink-film when required.
User-friendly, one operator can easily cover a pallet without any additional help.
Independent and mobile, moved to the pallets, avoiding handling of unsteady loads.
Quick and easy to set up, allows film to shrink under the pallet.
Key safety measures including fire extinguisher, zone limits, and protective wear.
Guidelines and warnings for using the appliance with paint, especially lead-based.
Covers gas bottle handling, work area, prohibited uses, and manual retention.
Discusses combustion fumes (CO2, CO) and the need for ventilation.
Defines the danger zone in front of the nozzle and risks of burning or fire.
Explains the principle of atmospheric air burners and piezoelectric ignition.
Details security valve, dead man's switch, and trigger guard for safe operation.
Provides technical specifications in both SI and Anglo-Saxon units.
Emphasizes reading warnings, using supplied hose/SECURIPACK, and handling gas bottles.
Illustrates and states forbidden uses like liquid propane and bottle on its side.
Step-by-step guide on connecting the SECURIPACK to the gas bottle.
How to check for leaks using bubble spray or soapy water.
Instructions on how to ignite the RIPACK 2200 using the trigger and power knob.
Step-by-step guide for shrink-wrapping a pallet using the RIPACK 2200.
Advice on distance, heat application, and continuous movement for shrink-wrapping.
Details on film reaction, speed, movement, and covering the entire pallet.
Guidance on waiting for cooling, checking wrapped goods, and storage.
Checks the SECURIPACK's safety mechanism for hose rupture.
Daily checks of the hose condition and the dead man's safety mechanism.
Instructions for cleaning the nozzle grille using petrol bath and brush.
Procedures for cleaning the venturi and injector with compressed air.
Steps for dismantling, cleaning, and reassembling the throttle and injector.
Guidance on lubricating fittings with specific grease for maintenance.
Addresses issues with ignition, causes like empty bottle or blocked filter, and remedies.
Details causes of ignition failure like bad contact, faulty lighter, or dirty nozzle.
Lists reasons for insufficient power, such as ambient temperature, blocked injector, or wrong gas.
Covers problems like lower flame, internal combustion, or hot nozzle and their remedies.
Addresses the issue of the combustion nozzle not going out immediately and its potential causes.
Details the total warranty on manufacturing flaws for new, unmodified appliances.
Outlines conditions for the one-year warranty of operation, excluding specific parts.
States manufacturer is not liable for claims if warnings are not respected or for accidents from misuse.
A detailed list of code articles and their designations for RIPACK 2200 spare parts.
Lists parts like ignition wire, gas tap, jet bearer, and high pressure hose.
Lists parts for natural gas conversion kits, including special jets and air reducers.
To Next Page
